3/4 inch plywood underlayment legs brackets for legs stain polyurethane foam brushes


Kreg Jig and Screws Staple Gun and Staples Drill Iron  Measuring Tape Level Square

Have your wood cut at the hardware store.

Pre drill for your Kreg Screws

Attach your three vertical pieces to the long top and bottom pieces.

Now add the center shelf.

Attach the leg brackets and the legs.

Now attach the back with the staple gun.

Now attach the veneer edge banding to the edges of the plywood.

Stain and Poly your piece.

The finished TV Stand

For more fun DIY's go to At Lane and High.